Archive for the 'Me Specs' Category
Murtadha

I love to play SUNKEN TREASURE SLOT MACHINE because I always get lucky on it so I am trying to make something similar to it

what I need:

One motor

4 AA batteries

box

glue

wire


hassan al-tulaihi(planning to mak a car)

I am going to make a car because I love cars and mechanic it is so pack project .

what I need:

-4 motor

-4 AA batteries

-wood

-wire

-super glue

The purpose of the Air Fresh is to make my living room good smell because my roommate and I smoke a lot so I tried to make something to make my living room smell good.

Air Fresh

One motor

4 AA batteries

positive/negative wires

plank of wood to hold it

I will use hard paper to caver the Air Fresh from out side and I will hold it in to the wood.

Cost: It start from $10 to $100

Size: I can make in deferent size as you like it

Safety: I t is very safe.

sam watkins-super shaker

i’m going to use a protein shaker cup drill a hole in the bottom of the cup and attach wire to the inside of the cup. i’ll take the battery pack to the side of the cup

what you need

-protien cup

-wire

-spray paint

-super glue

-motor and battery pack

Sam Watkins- super shaker

i’m going to use a protein shaker cup drill a hole in the bottom of the cup and attach wire to the inside of the cup. i’ll take the battery pack to the side of the cup

what you need

-protien cup

-wire

-spray paint

-super glue

-motor and battery pack

RAM Fan

The purpose of the RAM fan will be more of a novelty than something actually helpful. essentially, it will consist of:

2 sticks of RAM

One motor

4 AA batteries

positive/negative wires

plank of wood to hold it

As you can guess, i will attach the RAM to the motor to make a high-memory fan.

Budget: Free for me, as I can construct it from spare computer parts that don’t work anymore. to buy RAM though, it could cost anywhere from 20-100 dollars.

Size: No more than 6 inches long, maybe 3-4 inches wide, 5 inches tall.

Safety: I don’t expect it to turn very fast, so it should be safe.

Geoffry Atkinson – Cat Car

unction of Product:

  • To provide my cat with entertainment without me playing with him.
  • To have a motorize object be in motion until acted upon by an outside force (i.e. my cat)

Materials Required:

  • Wood
  • Tape/Electrical Tape
  • Wheels
  • Wire
  • Switch
  • 1 AA battery

Budget:

  • Very little, preferably something I have in the house
  • 0-$5

Size:

  • Something that my cat can move
  • Roughly 10 ounces

Safety:

  • Everything safely covered so as to not injure my cat
David Heitmeyer – Poker Fan

Poker Fan

Function of Product:

The Function of the Poker Fan is to provide a decorative piece to any poker enthusiasts home. For an exciting effect, the Poker Fan also has 8 spinning blades made out of poker cards which spin around, providing a twirling daze of cards!

5 measurable things required:

  1. Spin without cards flying out
  2. Be able to switch on/ off
  3. Make a spinning coil spin continuously
  4. Provide fun and enjoyment to any owner
  5. Provide the ability for all batteries to be removed/exchanged

Required Materials:

  • Motor
  • Two pieces of wood
  • Soldering and Soldering Gun
  • Wooden platform
  • Zip ties
  • Metal Bracket
  • 4 double AA batteries
  • Battery Holder
  • On/Off switch
  • Two electrical cables
  • Wound up metal coil
  • Drill w/ drill bits
  • Saw
  • One screw
  • Hot glue gun w/ hot glue
  • Deck of Playing Cards
  • Cardboard
  • Box cutting knife, Scissors, Wire cutter/stripper

Budget:

-          0 to $ 5

Size:

-          Approximately 5”x 10”x 11”

Power Limitations:

The Poker Fan does not have any power limitations. In fact, up to three of the batteries can be removed to make the fan spin slower.

Safety Concerns:

-          Beware of paper cuts!

Reliability

Very reliable and safe; should a body part come into contact with the spinning cards they will simply pop out of the coiled wire. They can then easily be mounted back in.

Matthew Phillip -me motor project

Function:  To keep the ac in my dorm room on since the ac is controlled by a motion detector.

Items:  Block of wood, springs made in class, motor, 4 AA batteries.

Size: small enough to keep out of the say but big enough to trigger the motion sensor.

Miguel E. Correa- Tooth Brush Holder…and Spinner

Function of Product:

                The Function of this product is to make holding and separating tooth brushes easier to avoid the sharing of bacterial diseases between tooth brushes… gross! The tooth brush holder will also spin entertaining the person brushing their teeth. This new invention will make brushing your teeth more FUN!!!

5 measurable things:

  1. Spin at a consistent speed
  2. Be able to hold a maximum of 8 tooth brushes
  3. Not fall apart/burst in flames
  4. Be entertaining to the hole family
  5. Switch on and off

Required Materials:

  1. Motor
  2. Tooth brushes
  3. Tape
  4. Small platform
  5. Disk
  6. Drill
  7. 4 double AA batteries
  8. Switch
  9. Wires

Budget:

-          0 to $ 10

Size:

-          Small enough to carry by hand- Weigh about 2 pounds.

Safety Concerns:

-          If anything else is mounted on the tooth brush holder such as a pen, sharpie, highlighter etc. DO NOT confuse it as a tooth brush!

  • Consult a doctor if u do

Reliability

-          Should be very reliable