Step 1: walls containing the servo assembled on the bottom platform of the control box.

Step 2: three sides of the control box assembled.

 

 

 

 

 

 

 

 

 Step 3: battery, servo and main electrical set (arduino & circuit board) are placed in the box.

Step 4: the 4 pieces that make rotating shaft are glued together.

 

 

 

 

 

 

 

 

Step 5: aluminum pieces that will contain the pitch shaft are connected to the pitch paltform

Stpe 6: screw two triangular aluminum pieces to the top of the rotating platform

 

 

 

 

 

 

 

 

Step 7: fix the motor in postion and fix the gear to motor’s shaft

Step 8: place the third triangular piece on top of the rotating platform

 

 

 

 

 

 

 

 

 

Step 9: fix the top rotating platform to the turntable with screws and nuts

Step 10: fix the bottom of the turntable to the top of the control box with screws and nuts

 

 

 

 

 

 

 

 

Step 11: align the pitch platform with the triangular pieces

Step 12: insert the pitch shaft with gear to connect triangular pieces with pitch platform